Follow this link to skip to the main content National Aeronautics and Space Administration Logo
NASA Banner
Mars Exploration Program
Home
  • navtop_search.png
MULTIMEDIA
1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  10   |  11   |  12   |  13   |  14   |  15   |  Next >     Last Page >>
Mars Science Laboratory mission team members ran mobility tests on California sand dunes in early May 2012 in preparation for operating the Curiosity rover, currently en route to Mars, after its landing in Mars' Gale Crater.
Test Rover Aids Preparations in California for Curiosity Rover on Mars
Michael Malin, left, principal investigator for three science cameras on NASA's Curiosity Mars rover, comments to a news reporter during tests with Curiosity's mobility-test stand-in, Scarecrow, on Dumont Dunes in California's Mojave Desert.
Watching Test Drives in California for Rover Mission to Mars
Back-and-forth blinking of this two-image animation shows movement of a sand dune on Mars. The images are part of a study published by Nature on May 9, 2012, reporting movement of Martian sand dunes at about the same flux (volume per time) as movement of dunes in Antarctica on Earth.
Advancing Dune in Nili Patera, Mars
Back-and-forth blinking of this two-image animation shows movement of ripples covering a sand dune on Mars.
Ripple Movement on Sand Dune in Nili Patera, Mars
NASA's Mars Exploration Rover Opportunity drove about 12 feet (3.67 meters) on May 8, 2012, after spending 19 weeks working in one place while solar power was too low for driving during the Martian winter.
Looking Back at Greeley Haven After Opportunity's First Drive of 2012
An in-flight camera check on NASA's Mars Science Laboratory spacecraft turned on illumination sources that are part of the Curiosity rover's Mars Hand Lens Imager (MAHLI) instrument.
Camera Test on Curiosity During Flight to Mars
A group of journalists take part in a field trip to learn about the clues hidden in the rock layers with Curiosity Project Scientist, John Grotzinger.
Mars Science Laboratory Journalist Field Trip
A Martian dust devil roughly 12 miles (20 kilometers) high was captured winding its way along the Amazonis Planitia region of Northern Mars on March 14, 2012 by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter.
Mars' Whirling Dust Devil
This image shows the target landing area for Curiosity, the rover of NASA's Mars Science Laboratory mission.
Destination for Mars Rover Curiosity
Curiosity, the big rover of NASA's Mars Science Laboratory mission, will land in August 2012 near the foot of a mountain inside Gale Crater.
'Mount Sharp' Inside Gale Crater, Mars
The landing site for NASA's Mars rover Curiosity was chosen for giving the mission access to examine the lower layers of a mountain inside Gale Crater.
'Mount Sharp' on Mars Compared to Three Big Mountains on Earth
Science team leaders for NASA's Mars Science Laboratory mission have chosen "Mount Sharp" as an informal name for the mountain beside the chosen landing site for the mission's rover, Curiosity.
Robert Sharp
A towering dust devil, casts a serpentine shadow over the Martian surface in this image acquired by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter.
The Serpent Dust Devil of Mars
The Thermal Emission Imaging System (THEMIS) camera on NASA's Mars Odyssey spacecraft has completed an unprecedented full decade of observing Mars from orbit.
Tenth Anniversary Image from Camera on NASA Mars Orbiter
A NASA Mars Science Laboratory test rover called the Vehicle System Test Bed, or VSTB, serves as the closest double for Curiosity in evaluations of the mission's hardware and software.
Testing Precision of Movement of Curiosity's Robotic Arm
This image, taken Jan. 26, 2012, shows NASA's no-longer-active Phoenix Mars Lander spacecraft after its second Martian arctic winter.
Phoenix Lander After Second Martian Winter
Two instruments at the end of the robotic arm on NASA's Mars rover Curiosity will use calibration targets attached to a shoulder joint of the arm.
Contact Instrument Calibration Targets on Mars Rover Curiosity
The Lincoln penny in this photograph is part of a camera calibration target attached to NASA's Mars rover Curiosity, which is on track for a landing on Mars the night of Aug. 5 to Aug. 6, 2012.
Lincoln Cent on Mars Rover
This image provides a way to have a full-size printout of the calibration target for the Mars Hand Lens Imager (MAHLI) camera on NASA's Mars rover Curiosity.
Full-Scale Image of MAHLI Calibration Target
During pre-flight testing, the Mars Hand Lens Imager (MAHLI) camera on NASA's Mars rover Curiosity took this image of the MAHLI calibration target from a distance of 3.94 inches (10 centimeters) away from the target.
Calibration Target as Seen by Mars Hand Lens Imager
During pre-flight testing in March 2011, the Mars Hand Lens Imager (MAHLI) camera on NASA's Mars rover Curiosity took this image of the MAHLI calibration target under illumination from MAHLI's two ultraviolet LEDs (light emitting diodes).
MAHLI Calibration Target in Ultraviolet Light
Near the lower left corner of this view is the three-petal lander platform that NASA's Mars Exploration Rover Spirit drove off in January 2004.
Spirit Lander and Bonneville Crater in Color
This image, taken Jan. 26, 2012, shows the back shell of NASA's Phoenix Mars Lander spacecraft after its second Martian arctic winter.
Phoenix Back Shell After Second Martian Winter
The Mars Hand Lens Imager (MAHLI) camera at the end of the robotic arm of NASA's Curiosity rover will use a calibration target attached to a shoulder joint of the arm.
Calibration Target on Curiosity for Camera on Rover's Arm
This enhanced-color image shows sand dunes trapped in an impact crater in Noachis Terra, Mars.
Dunes in Noachis Terra Region of Mars
1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  10   |  11   |  12   |  13   |  14   |  15   |  Next >     Last Page >>

USA.gov
PRIVACY     FAQ     SITEMAP     CREDITS     FEEDBACK